人們常說，服務器的負載能力，很大程度上取決于系統管理員的配置和優化能力。這個是對的，相同的硬件、不同的軟件配置，會造成截然不同的效果。下面我將給大家介紹一下如何優化 sysctrl, Apache 以及 MySQL 。請注意，所有配置均為取決于個人，請根據自己的實際情況做調整。


配置Sysctl

編輯此文件：

nano -w /etc/sysctl.conf


如果該文件為空，則輸入以下內容，否則請根據情況自己做調整：

# Controls source route verification
# Default should work for all interfaces
net.ipv4.conf.default.rp_filter = 1
# net.ipv4.conf.all.rp_filter = 1
# net.ipv4.conf.lo.rp_filter = 1
# net.ipv4.conf.eth0.rp_filter = 1

# Disables IP source routing
# Default should work for all interfaces
net.ipv4.conf.default.accept_source_route = 0
# net.ipv4.conf.all.accept_source_route = 0
# net.ipv4.conf.lo.accept_source_route = 0
# net.ipv4.conf.eth0.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1

# Increase maximum amount of memory allocated to shm
# Only uncomment if needed!
# kernel.shmmax = 67108864

# Disable ICMP Redirect Acceptance
# Default should work for all interfaces
net.ipv4.conf.default.accept_redirects = 0
# net.ipv4.conf.all.accept_redirects = 0
# net.ipv4.conf.lo.accept_redirects = 0
# net.ipv4.conf.eth0.accept_redirects = 0

# Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets
# Default should work for all interfaces
net.ipv4.conf.default.log_martians = 1
# net.ipv4.conf.all.log_martians = 1
# net.ipv4.conf.lo.log_martians = 1
# net.ipv4.conf.eth0.log_martians = 1

# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 25

# Decrease the time default value for tcp_keepalive_time connection
net.ipv4.tcp_keepalive_time = 1200

# Turn on the tcp_window_scaling
net.ipv4.tcp_window_scaling = 1

# Turn on the tcp_sack
net.ipv4.tcp_sack = 1

# tcp_fack should be on because of sack
net.ipv4.tcp_fack = 1

# Turn on the tcp_timestamps
net.ipv4.tcp_timestamps = 1

# Enable TCP SYN Cookie Protection
net.ipv4.tcp_syncookies = 1

# Enable ignoring broadcasts request
net.ipv4.icmp_echo_ignore_broadcasts = 1

# Enable bad error message Protection
net.ipv4.icmp_ignore_bogus_error_responses = 1

# Make more local ports available
# net.ipv4.ip_local_port_range = 1024 65000

# Set TCP Re-Ordering value in kernel to ‘5′
net.ipv4.tcp_reordering = 5

# Lower syn retry rates
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3

# Set Max SYN Backlog to ‘2048′
net.ipv4.tcp_max_syn_backlog = 2048

# Various Settings
net.core.netdev_max_backlog = 1024

# Increase the maximum number of skb-heads to be cached
net.core.hot_list_length = 256

# Increase the tcp-time-wait buckets pool size
net.ipv4.tcp_max_tw_buckets = 360000

# This will increase the amount of memory available for socket input/output queues
net.core.rmem_default = 65535
net.core.rmem_max = 8388608
net.ipv4.tcp_rmem = 4096 87380 8388608
net.core.wmem_default = 65535
net.core.wmem_max = 8388608
net.ipv4.tcp_wmem = 4096 65535 8388608
net.ipv4.tcp_mem = 8388608 8388608 8388608
net.core.optmem_max = 40960

如果希望屏蔽別人 ping 你的主機，則加入以下代碼：

# Disable ping requests
net.ipv4.icmp_echo_ignore_all = 1

編輯完成后，請執行以下命令使變動立即生效：

/sbin/sysctl -p
/sbin/sysctl -w net.ipv4.route.flush=1

MySQL優化

編輯MySQL的配置文件：

nano /etc/my.cnf

輸入以下內容：

[mysqld]
connect_timeout=15
interactive_timeout=100
join_buffer_size=1M
k